Stirrer Accessories
Chemglass Life Sciences Chemglass Stirrer Bearing, Universal 45/50 (16 mm shaft) - PTFE Chem-Vac ball bearing
Universal Chem-Vac PTFE stirrer bearing designed to provide a vacuum-tight, flake-free seal for polished glass, PTFE, or stainless steel stirrer shafts. The upper portion of the bearing rotates with the shaft to prevent flaking and maintain seal integrity during vacuum or low-pressure stirring.
- Provides a vacuum-tight, flake-free seal.
- Compatible with polished glass, PTFE, and stainless steel shafts.
- Designed for 16 mm shaft diameter and 45/50 joint size.
- PTFE body with a glass ball bearing for chemical resistance.
- Operates under moderate vacuum (~5 Torr) and low pressure (~3 PSI).
- Maximum recommended speed 500 RPM.
Chemglass Life Sciences PFA Coated Hastelloy C-276 Thermocouple: 1/4" Diameter x 26" Long, Type "K", Fits Reactor Capacity: 10L-20L
PFA Coated Hastelloy C-276 Thermocouple: 1/4" Diameter x 26" Long, Type "K", Fits Reactor Capacity: 10L-20L. Thermocouples for use with Chemglass process reactors. Available in both ¿T¿ (blue connections) and ¿K¿ (yellow connections). The detachable thermocouples are for direct insertion in the reactors using a CG-1048-A or CG-1042-E thermocouple adapter, while the 4¿ long Hastelloy C-276 style is for use with the CG-1971 baffles and adapters. Detachable type thermocouples have a standard male plug (OST) and require a coiled extension cord for connection to the CG-3498 temperature monitor. The 4¿ long Hastelloy C-276 thermocouples are supplied with a 4ft FEP insulated cord having a standard male plug (OST).PLEASE NOTE: THE 1/2¿ DIAMETER PROBES HAVE A TRANSITION TO 6¿ OF PTFE LEADS AND ARE CLEAR FEP PTFE COATED.Maximum Probe Temperature Based on Coating- FEP is 200¿C and the Black PFA is 250¿C
Ace Glass, Inc. 10mm 46cm stainless steel stir shaft, polished, removable button type, 20cm flat section
10mm O.D. 46cm stainless steel polished stir shaft, drilled type, with removable button. Stir Shaft also has a 20cm flat section for use with agitators secured by set screws. For use with Trubore and PTFE bearings.
Chemglass Life Sciences Replacement 25.4mm Stirrer Shaft, Reactor Size: 50L Squatty/400mm Flange, Fits Support Frame: CG-1968-Y-12, Overall Length: 43-3/8"
Replacement 25.4mm Stirrer Shaft, Reactor Size: 50L Squatty/400mm Flange, Fits Support Frame: CG-1968-Y-12, Overall Length: 43-3/8". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8 wide flat. REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
Ace Glass, Inc. Agitator, turbine, PTFE, 10mm OD, 64mm diameter
Agitator, turbine, PTFE, 10mm, OD, 64mm diameter.All-PTFE turbine type agitator. Unique locking arrangement assures positive grip. Agitator fits 10 mm shafts. Shaft opening is drilled straight thru to allow positioning of agitator at any drilled position on shaft as well as the bottom. For use with bead type glass shafts, 8068-G, 8075 or PTFE shaft, 8071.
Bellco Glass, Inc. Rushton Impeller Assembly ,7L
Rushton impeller 2”OD with 6 vertical blades equally spaced around the center hub. Manufactured from stainless steel and designed for high speed fermentation protocols. Assembled onto 3L metric bioreactor drive stem.. MADE IN THE USA
Chemglass Life Sciences Replacement Inserts for 10mm Nylon Chuck
Replacement Inserts for10mm Nylon Chuck (CG2039A040).